Length
3.0
Width
1.75
Height
4.63
Weight
0.12
- American Made Brass
- Brass Fittings/Access Valves/ Caps & Couplers
- For use with copper, brass, aluminum, steel, and plastic tube provided and acceptable flare could be generated with the material.
- Long nuts are recommended when vibration is a factor. Tubing should be double-flared in extreme applications to minimize flare thinning on over-tightening.
- Pipe sizes listed are standard nominal pipe size and threads are to dry seal taper pipe standards.
- Most heavy-duty ACR tube fittings conform to SAE, ASA, and AHRI Standards for hydraulic, marine, and refrigeration service.
- Long dry seal pipe threads minimize leakage and provide more clearance for tightening flare nuts.
- Shapes, elbows, tees, etc., are made from brass forgings to maximize strength and eliminate cracks.
- Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged.
- Many tees and crosses are tapped to receive and access core in all 1/4" SAE flare ends.
- Most valves are equipped with cap and one valve core (braze type, loosely assembled)